(405) 536-9187 Get a free estimate
Drywall contractor spraying texture over a patched wall to match the surrounding finish

Edmond drywall: Repair, patching, texture matching, ceilings & installation

We repair drywall damage of every kind in Edmond and the surrounding OKC metro — holes from doorknobs and furniture, settling cracks at door and window corners, water stains and sagging after a roof or plumbing leak, popped fasteners, failed tape seams, and ceilings that need patching or full replacement. We also handle new installation, hanging, taping, and finishing for remodels, additions, and commercial buildouts.

Sheetrock repair is most of what we do, and it's where the craft actually shows. Anyone can screw a patch into a hole. Blending knockdown or orange peel into a wall that's been painted three times over twenty years is the part that takes practice, and it's the difference between a repair you forget about and one you notice every afternoon when the light hits it.

Most repairs are done in a single visit. We contain the dust before we cut, we match your texture rather than approximating it, and we clean up before we leave. Every job starts with an on-site look and a written quote. Contact us today.

Call (405) 536-9187

Get a free estimate

Tell us about the damage and we’ll follow up to schedule an on-site look.

We use your details only to respond about your drywall project.

Thanks — we got your request and will be in touch shortly.

Drywall repair services

We handle drywall damage of every type, from small nail holes to significant water damage, using methods matched to the specific problem. Our repairs include texture matching, seam work, and full retexturing so the finished surface blends with the surrounding wall.

Cut-in drywall patch being screwed into place over a hole in a wall

Drywall hole & patch repair

We repair holes ranging from small nail punctures to larger openings caused by doorknobs, furniture, or accidental impact. Small patches typically involve a self-adhesive mesh or a cut-in patch, joint compound, and sanding to create a smooth surface.

Larger holes require us to cut back to the nearest studs and install a new section of drywall for a stable repair. We match the thickness of your existing drywall to avoid uneven spots.

Pricing depends on the size of the hole and the number of repairs needed in one visit. We assess each job on-site before providing a quote.

Drywall finisher applying compound along the joint where the wall meets the ceiling

Drywall crack repair

We repair cracks caused by settling, temperature changes, or age. Hairline cracks are filled with flexible compound designed to resist re-cracking, while wider cracks may require mesh tape reinforcement before we apply compound.

Central Oklahoma’s clay soils expand and contract with the seasons, and that movement shows up indoors as cracks at door corners, window corners, and ceiling joints. Because cracks in those locations often indicate movement in the framing rather than a surface problem, we inspect the surrounding area before starting repairs. This helps us determine whether the crack is cosmetic or a sign of a larger structural issue.

Once repaired, we sand the area and blend it with the existing texture. We also check nearby walls for related cracking, since one crack can be part of a wider pattern.

Texture matching & retexturing

We match existing wall and ceiling textures so patched areas are not visually distinct from the rest of the surface. Common textures we replicate include:

  • Orange peel
  • Knockdown
  • Popcorn (where retained)
  • Smooth finish
  • Hand-troweled or skip-trowel patterns

We test the texture on a small section before completing the full repair to confirm the match. When an exact match isn’t possible due to product changes over time, we recommend retexturing the full wall or ceiling for a consistent look.

Retexturing is often necessary after large repairs, water damage, or popcorn ceiling removal, since these processes typically require a fresh texture application.

Worker in a respirator sanding a ceiling smooth with a dust-extracting pole sander

Popcorn ceiling removal

We remove popcorn ceilings by wetting the texture, scraping it off, and repairing the underlying drywall. This process often reveals minor imperfections that we patch before applying a new finish.

Ceilings installed before the 1980s may contain asbestos, so we assess the material and, when needed, recommend testing before removal begins. This step protects your health and ensures compliance with safety guidelines.

Once the texture is removed, we typically apply a smooth or lightly textured finish, depending on your preference. This gives the ceiling a more modern appearance and makes future maintenance easier.

Drywall finisher skimming a large replaced section so it blends into the textured wall

Water damage drywall repair

We repair drywall affected by roof leaks, plumbing issues, or flooding. Damaged sections are removed to prevent mold growth, and we inspect the surrounding studs and insulation for moisture before installing new drywall.

Water-damaged drywall often shows discoloration, sagging, or a soft texture, all signs that the material needs replacement rather than patching. We cut back to solid, dry drywall to ensure the repair holds long-term.

After installation, we match texture and paint as needed. If the water source isn’t fully resolved, we recommend addressing that separately to prevent repeat damage.

Drywall finisher applying joint compound over a taped ceiling seam

Sheetrock & drywall seam repair

We repair seams where drywall panels meet, an area prone to visible lines, bubbling tape, or cracking over time. This includes removing old tape, reapplying compound, and smoothing the seam so it blends with the wall.

Seam issues often result from poor original taping, humidity changes, or house settling. We assess the cause before repairing to reduce the chance of the seam reopening.

For larger rooms or hallways with multiple seams, we inspect the full length of each seam rather than only the visibly damaged section. This helps us catch early-stage cracking before it becomes a larger repair.

Ceiling repair

Ceilings develop problems from foundation movement, roof leaks, humidity, and age, and each cause requires a different repair approach. We assess the damage first, then match materials and texture so the finished surface blends with the rest of the room.

Drywall finisher taping a vaulted ceiling with the windows sealed off by plastic sheeting

Drywall ceiling repair

We repair ceiling drywall damaged by water leaks, impact damage, or sagging seams. Our process starts with removing compromised material and checking for moisture or structural issues behind it.

Common ceiling drywall repairs we handle include:

  • Water stain removal and panel replacement
  • Popped nail or screw fastener repair
  • Seam separation and joint tape failure
  • Small to large hole patching
  • Full panel replacement for extensive damage

We use moisture-resistant board in bathrooms, kitchens, and other areas prone to humidity. Every repair is finished with proper taping, mudding, and sanding before texture application. We check surrounding areas for related issues, since ceiling damage often points to a leak or ventilation problem that needs separate attention.

Drywall finisher smoothing joint compound on a ceiling overhead

Ceiling crack & sag repair

Cracks and sagging indicate movement in the structure above the ceiling or a failure in the drywall itself. We inspect the pattern and location of cracks to determine whether the issue is cosmetic or structural.

Hairline cracks along seams are usually a tape or joint compound failure. Larger cracks radiating from a corner, or a ceiling that sags between joists, often point to moisture damage or insufficient support.

Our repair process for these issues includes:

  • Identifying the root cause before starting repairs
  • Removing damaged sections that won’t hold a patch
  • Reinforcing support where sagging has occurred
  • Applying new joint compound and tape
  • Sanding and priming for a smooth surface

We address the underlying cause first. Patching over a moisture problem or structural shift only delays a repeat repair.

Room with freshly taped drywall seams across the ceiling and walls

Ceiling texture & finish matching

A ceiling repair is only complete when the texture matches the surrounding surface. We work with popcorn, knockdown, orange peel, smooth, and hand-troweled finishes, and we replicate the pattern and density of the existing texture.

Matching an older texture, especially one that’s been painted over multiple times, takes more skill than applying a fresh coat. We test our approach on a small area before finishing the full repair to confirm the match is accurate.

Once texture is applied and dry, we prime and paint the repaired section to blend with the ceiling color. Our goal is a seamless result, not a visible patch.

Drywall installation & hanging

We handle every stage of a drywall project, from hanging new sheets to taping, finishing, and prepping walls for paint. Our team works on residential and commercial properties throughout Edmond, adjusting our approach based on the room, the wall height, and the finish level our clients want.

New construction room with drywall hung and taped on the walls and ceiling

New drywall installation

We install drywall for new construction, additions, and full room builds. Before we begin, we measure each space and calculate the exact amount of material needed to limit waste and keep costs predictable.

We work with standard 1/2-inch drywall for most walls and 5/8-inch fire-rated board for garages, shared walls, and ceilings where local code requires it. Our crews cut and fit panels around outlets, vents, and fixtures so the final surface sits flush and even.

We also account for ceiling height and layout when planning panel orientation, which affects how many seams we need to tape later. This step matters because fewer seams generally mean a smoother finished wall.

Installer on a step ladder fastening a new drywall panel to the ceiling

Drywall hanging

Hanging drywall correctly sets the foundation for everything that follows. We fasten each panel to wall studs or ceiling joists using screws spaced according to manufacturer guidelines, typically every 12 to 16 inches along the edges and field.

We check stud spacing before we start, since inconsistent framing can cause panels to sit unevenly. Our team staggers seams between rows of drywall to reduce cracking over time, and we cut panels to fit tightly around corners, windows, and doorframes.

For ceilings, we use additional support or two-person lifting techniques to prevent sagging before fasteners are set. We inspect each hung panel for flush alignment before moving to the taping stage.

Two drywall finishers taping and mudding seams in a basement finish

Drywall taping & finishing

Once panels are hung, we tape and finish seams to create a smooth, paint-ready surface. We apply joint compound in multiple thin coats, sanding between each layer to remove ridges and high spots.

Our finishing process includes:

  • Embedding paper or mesh tape into the first coat of compound
  • Applying a second coat to widen and smooth the seam
  • Adding a final skim coat for a seamless surface
  • Sanding the entire wall for an even texture
  • Matching texture to existing walls when doing repairs

We offer different finish levels, from a basic Level 3 for garages and storage areas to a Level 5 smooth finish for living rooms and other visible spaces. Level 3 suits walls that will be textured, Level 4 is the standard for most painted interior walls, and Level 5 is worth the extra labor in rooms with raking light or high-gloss paint, where every imperfection shows. We recommend the finish level based on lighting conditions and how the room will be used.

Garage with newly hung and taped drywall on the walls and ceiling

Garage & utility space drywall

Garages, laundry rooms, and mudrooms have different requirements than living spaces. For garages we install 5/8-inch Type X fire-rated drywall on walls and ceilings shared with living areas, and we finish to a Level 3 rather than a Level 5 — a textured finish hides dings from bikes, ladders, and car doors far better than a smooth one.

In laundry rooms, mudrooms, and utility closets we use moisture-resistant board, and cement board behind any tiled surface. Standard drywall in a room that sees steam or a leaking washer connection softens and fails at the base of the wall within a few years.

Remodeled room with new drywall around the windows ready for finishing

Remodel & addition drywall

Remodels and additions require us to match new drywall work with existing walls, which involves attention to texture, thickness, and seam placement. We inspect the existing walls first to identify the texture style, whether it’s orange peel, knockdown, or smooth, so the new section blends in.

When we tie new drywall into an addition, we make sure the framing lines up correctly before hanging panels. This step prevents uneven seams where old and new construction meet.

We also patch and finish any areas disturbed during electrical, plumbing, or HVAC work as part of the remodel. Our goal is a finished wall that looks original, not patched.

Commercial drywall services

Commercial spaces demand drywall work that meets tighter deadlines, higher building codes, and larger square footage than residential jobs. We handle repairs, new installations, tenant buildouts, and specialty assemblies for offices, retail stores, and other commercial properties in Edmond.

Commercial interior with patched and taped drywall walls and doorways

Commercial drywall repair

Commercial buildings take a different kind of wear than homes. Foot traffic, equipment moves, and frequent renovations all contribute to dents, cracks, and water damage in drywall.

We assess the damage first, then match texture and finish so repairs blend into existing walls. Our crews work around business hours when needed, including evenings or weekends, to avoid disrupting operations.

Common repair jobs include:

  • Patching holes from fixtures, signage, or equipment
  • Fixing water-damaged ceiling tiles and wall sections
  • Repairing cracks from building settling
  • Restoring walls after electrical or plumbing work

We use commercial-grade joint compound and matching texture techniques so patched areas hold up under continued use.

Stack of drywall sheets on a pallet inside a commercial space under construction

Commercial drywall installation

New commercial construction and major renovations require drywall installed to precise specifications. We follow blueprints and coordinate with general contractors, electricians, and other trades to keep projects on schedule.

Our installation process covers framing verification, hanging boards, taping, mudding, and sanding to a finish level that matches the project scope. Commercial jobs often call for Level 4 or Level 5 finishes, particularly in spaces with high visibility or specific lighting conditions.

We work with standard gypsum board as well as moisture-resistant and impact-resistant panels depending on the room’s function. Warehouses, restaurants, medical offices, and retail spaces each have different structural and code requirements, and we adjust materials accordingly.

Interior buildout with new drywall partition walls and openings

Office & retail tenant improvements

Tenant improvement projects involve reconfiguring interior spaces to fit a new business’s layout. This might mean adding partition walls, removing existing walls, or building out entirely new floor plans within an existing shell.

We coordinate closely with property managers and business owners to meet lease deadlines. Retail buildouts often require faster turnaround since delayed openings cost tenants revenue.

Our tenant improvement work includes partition wall construction for offices and private rooms, wall removal for open floor plan conversions, ceiling grid drywall for retail and restaurant spaces, and custom soffits and bulkheads to conceal HVAC or add design features.

We keep dust containment measures in place throughout these projects since tenant improvements often happen in occupied buildings.

Commercial space with drywall hung under an open steel ceiling and a scissor lift

Fire-rated & soundproof drywall

Commercial buildings frequently require fire-rated drywall assemblies to meet local building codes, particularly in stairwells, mechanical rooms, and shared walls between tenant spaces. We install Type X and Type C gypsum board rated for one-hour or two-hour fire resistance depending on the application.

Soundproofing matters in multi-tenant offices, medical facilities, and conference rooms where privacy is a concern. We use techniques such as double-layer drywall, resilient channel systems, and acoustic sealant to reduce sound transmission between rooms.

Both fire-rated and soundproof assemblies must be installed according to manufacturer specifications to maintain their rated performance. We follow these specifications closely and can provide documentation for inspections when required.

Why we’re the best drywall company in Edmond

Our reputation in Edmond is built on a repair process that identifies the root cause of damage and a material selection that matches each project’s specific needs. We combine hands-on experience with the right tools and products to deliver results that hold up over time.

Root cause first

We find out why the damage happened — a leak, settling, a failed seam — before we patch it, so the same repair doesn’t come back.

Dust contained before we cut

We seal off the work area and cover floors and furnishings before any damaged drywall comes out.

Texture matched, not approximated

We test on a small section first, so the repair disappears into the wall once it’s painted.

A written quote up front

Every job starts with an on-site look and an itemized price in writing before any work begins.

Most repairs in one visit

Small and medium patches are usually finished in a single trip. Larger repairs are scheduled around cure time.

Cleanup included

We haul out debris and leave the room ready to use — no dust left on your floors.

Planning & timeline

A drywall project moves through several distinct phases, and knowing what happens at each one helps homeowners and contractors plan around the work. Below, we outline the typical sequence from delivery to final finish.

Drywall installation timeline — what to expect at each stage

We break every project into four core stages, each with its own time frame depending on the size of the space. Material delivery and prep is when we measure the space, order the correct board thickness, stage materials on-site, and inspect framing. Hanging is when we cut and fasten panels to studs or ceiling joists, which takes longer in larger commercial spaces or rooms with high ceilings. Taping and mudding requires multiple coats with drying time between each; we typically apply three coats, allowing 24 hours per layer. Sanding and finishing is the final stage, where we sand seams smooth and prep walls for primer or texture.

StageTypical duration
Delivery & prep1 day
Hanging1–3 days
Taping & mudding2–4 days
Sanding & finishing1–2 days

Most standard rooms are complete within a week; larger projects may take longer based on scope.

Cost & budget

Drywall pricing in Edmond depends on square footage, ceiling height, and the finish level we apply. Small repairs are a fraction of the cost of a full room installation, and we quote both on-site rather than over the phone.

Drywall repair cost guide — what affects the price

We base every quote on a few core factors that determine the final number.

  • Size of the damaged area: small patches cost less than large sections requiring new sheets.
  • Ceiling height: rooms with vaulted or high ceilings require more labor and equipment.
  • Type of drywall: moisture-resistant or fire-rated board costs more than standard panels.
  • Finish level: a smooth, paint-ready finish takes more time than a basic texture match.
  • Access to the area: repairs behind furniture, in tight closets, or above stairwells add labor time.
  • Texture difficulty: an aged, repainted hand-troweled texture takes longer to match than a standard orange peel.

We provide a free in-home estimate before starting any project. This lets us assess the damage firsthand and give an accurate, itemized price rather than a rough guess.

Get a free estimate

Proudly serving Edmond and nearby areas

We work throughout Edmond and the northern OKC metro, including Oklahoma City, Nichols Hills, The Village, Arcadia, Deer Creek, Guthrie, Piedmont, Jones, and Yukon. If you’re just outside that list, call us anyway — we take projects in surrounding areas regularly.

Frequently asked questions

How long does drywall repair take?

Most small to medium patches are finished in a single visit. Larger repairs take two or three days, not because the work is slow but because joint compound has to cure between coats — rushing that is what causes a patch to crack or telegraph through the paint later. Texture matching and priming add a few hours on the final day.

Is drywall repair cheaper than full replacement?

Yes, in almost every case. Repairing damaged sections costs a fraction of tearing out and rehanging a full wall or ceiling. Replacement only makes sense when damage is widespread — extensive water saturation, mold behind the board, or a wall with so many failed seams that patching each one costs more than starting over. We’ll tell you which situation you’re in during the estimate.

Does homeowners insurance cover drywall repair?

Usually, when the damage is sudden and accidental — a burst pipe, a storm-damaged roof, an appliance failure. Insurance typically will not cover damage from long-term leaks, ongoing humidity, or deferred maintenance, since those are classified as neglect rather than an event. We provide detailed documentation and photos for claims, and we work with adjusters regularly.

Can you match my existing wall texture?

Yes. We match orange peel, knockdown, skip-trowel, hand-troweled, and smooth finishes, and we test on a small section before committing to the full repair. When an exact match isn’t achievable — usually because the original product is no longer made or the wall has been repainted many times — we’ll tell you upfront and recommend retexturing the full wall or ceiling instead of leaving you with a patch that almost matches.

Do you repair water-damaged ceilings?

Yes. We remove the saturated board, inspect the joists and insulation above it for moisture, and replace with new material once the cavity is dry. We do not patch over wet drywall. If the leak source hasn’t been fixed yet, get that handled first — otherwise the repair fails and you pay twice.

How much does drywall repair cost in Edmond?

Cost depends on the size of the damage, the number of separate repairs, ceiling versus wall access, and how difficult the existing texture is to match. Small patches sit at the low end; ceiling work and multi-room repairs cost more because of access and cure time. We quote every job on-site after seeing the actual damage — anyone quoting drywall repair over the phone is guessing.

What does our expert drywall repair process involve?

We start every job with an on-site inspection to assess the damage and identify what caused it. This step matters because water stains, cracks, and holes often point to issues beyond the surface, like plumbing leaks or structural settling.

Once we understand the scope, we outline a clear plan and provide an upfront quote before any work begins.

Our repair process typically follows these steps:

  1. Assessment — we inspect the damaged area and surrounding surfaces.
  2. Containment — we seal off the work area and protect floors and furnishings before cutting.
  3. Preparation — we remove damaged material and clean the work area.
  4. Repair — we patch, tape, or replace drywall sections as needed.
  5. Finishing — we sand and texture-match the repair to blend with existing walls.
  6. Cleanup — we remove debris and leave the space ready to use.

We keep our clients informed at each stage so there are no surprises.

Which drywall materials & finishes do we use?

We select materials based on the room and its conditions. Standard 1/2-inch drywall works for most interior walls, but we use moisture-resistant board in bathrooms, kitchens, and laundry areas, and cement board behind tile in wet areas.

For garages, basements, or areas near fireplaces, we install 5/8-inch Type X fire-rated or impact-resistant drywall when required by code or client preference. For curved walls and archways we use 1/4-inch board, which bends without cracking.

On finishes, we work to Level 3 for textured walls and garages, Level 4 for standard painted surfaces, and Level 5 where high-gloss paint or strong side lighting demands a flawless surface. We match texture types, including knockdown, orange peel, and smooth finishes, to your existing walls so repairs are not visible once painted.

Do you offer free estimates?

Yes. Call (405) 536-9187 to schedule. We come to you, assess the damage, and give you a written breakdown before any work starts.

Get a free estimate on your drywall repair

Tell us what’s damaged and we’ll take a look on site, then put the scope and the price in writing before any work starts.

Call (405) 536-9187 Get a free estimate
Call now Free estimate